Loading... Please wait...
  • FluorEX Max Fluoride-Free - Benchtop system
  • FluorEX Max filter cartridge

Fluoride-Free Benchtop Filter single

3.00 KGS
Calculated at checkout

Product Description

This Benchtop fluoride-free filter is designed for nice town water but which contains fluoride (e.g. Lower Hutt or aquifer water with fluoride added). Then no extra prefilter is required.

The FluorEX Max is revolutionary technology offering removal of fluoride to non detectable levels! It is an ALL NATURAL, ALUMINA FREE cartridge !

We have tested many cartridges. Most of them had in common that they claim to remove 'up to 99% fluoride' and as Hill Laboratories, Hamilton NZ proved with samples taken by us, they did not ! Most of them just took out 40-50% of fluoride, one achieved 78% but the water tasted bitter. Most of those contain alumina as media which is fraud with issues about aluminium leaching into the water ... which would require an additional secondary KDF filter (for heavy metals) to remove.

benchtop-filter-w.jpgThis FluorEX Max is all natural and leaves healthy minerals like calcium and magnesium in the water, and it wastes no water (not like Reverse Osmosis systems)

Removal rate: Ionza independently tested the water samples taken from Auckland City to verify the fluoride extraction and its performance. Tested by Hill Laboratories in Hamilton: Fluoride content in water sample less than 0.05g/m3 = non detectable, see test results attached. 

Removal rate at beginning of cartridge usage is 99%, after 2000 litres usage approx 90-95%*

Cfluorex-max-origin.jpgapacity: 2000 litres, or 6-12months. This means approx 12 months for 1-2 person household, or 6 months for 4 person household (*depending on volume of water used)

Monitoring of usage: We recommend to install a water flow meter to monitor usage. Follow this link for more information: >> Water flow meter

Water Flow rate: The FluorEX-Max filter is most effective to run at approx 1.5 liter/min.

It is most effective when a carbon filter is installed in front to remove heavy metals, so it protects the capacity of the FluorEX Max filter to focus on fluoride predominantly.

Test result Fluoride sample 1 = FluorEX-Max filter


Auckland City Tap-water has approx 0.78g/m3 fluoride content.

After the FluorEX Max filtration the fluoride content in the water was reduced to less than 0.05g/m3 (test result) being non-detectable.


Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Click the button below to add the Fluoride-Free Benchtop Filter single to your wish list.